Wheel Guards are nylon separator plates that are approximately .03”
thick. They are placed between the hub or drum and the wheel, and
between two wheels on a dual wheel application. The Wheel Guard is
highly recommended for all applications and all combinations of
aluminum and steel wheels.
PART NO. |
APPLICATION |
HOLES |
BOLT CIRCLE |
I.D. |
GL-5901 |
For wheels using 1-1/8” and 7/8” diameter studs (stud pilot wheels) |
10 |
11 1/4” |
8 13/16” |
GL-5902 |
For wheels using 3/4” diameter studs (stud pilot wheels) |
10 |
11 1/4” |
8 13/16” |
GL-5903 |
For wheels using 22 mm diameter studs "Unimount” (hub pilot) |
10 |
285.75 mm |
8 13/16” |
GL-7902 |
For wheels using 22 mm diameter studs "Motor Wheel” (hub pilot) |
8 |
275 mm |
8 13/16” |
GL-8482 |
For GM and Dodge trucks using 5/8” diameter studs |
8 |
6 1/2” |
4.82” |
GL-8525 |
For Ford trucks using 5/8” diameter studs |
8 |
6 1/2” |
5.25” |
GL-8675 |
For Ford trucks with 19.5” wheels using 5/8” diameter studs |
8 |
225 mm |
6.75” |
GL-7381 |
For bus wheels with 22 mm diameter studs |
10 |
335 mm |
|