For more information call
(800)321-6471
Products
PRODUCT SYSTEMS
Standard Bore Valve
Super Large Bore Valve
Mega Bore Valve
Large Bore Valve
Z-Bore Valve
PRODUCT TYPES
Air/Liquid Valves
Alcoa
Aviation
Couplers & Nipples
Digital & Dial Gauges
Gauges
Grommets, Hex Nuts, Washers
Hydraulic Jacks, Equipment
Inflation
Inflator Systems
Ken-Tool
Large Bore Air Chucks
Large Bore Tools
Liquid Fill
O-rings & L-Rings
PT Valve System
Retyred Tire Furniture
Service Gauges
Special Applications
Standard Bore Air Chucks
Standard Bore Valve Tools
Tank Valves & Bead Seaters
Tire Deflation
Torque Systems
Valve Cores, Caps, Adapters
Valve Extension
Wheel Nuts
Unsure which product is right for you? Click here.
Systems
Large Bore Valve
Super Large Bore Valve
Z-Bore Valve
Mega Bore Valve
Tire Management System
Unsure which product is right for you? Click here.
Solutions
Mining Solutions
Commercial Solutions
Passenger & Light Truck
Aviation Solutions
Unsure which solution is right for you? Click here.
Videos
Catalog
SHOW SCHEDULE
CAREERS
Our Products
:
Product Systems
>
Super Large Bore Valve Systems
>
Inflators
Super Large Bore Inflator Adapter
Super Large Bore Inflator Adapter
SKU:
IN-100A
no
Product Details
The Haltec design of the Super Large Bore inflator adapter offers many advantages.
New! Safer alternative to the IN-80A
Left hand threads on union body - will not come loose when screwing on to valve
Non-removable stem guide
3/4" pipe thread for easy air hose connection. During inflation, air pressure in the tire can be checked through the stem knob with a tire pressure gauge.
Will insert or extract CH-8 or CH-9 core housing
Pressure can be checked without disconnecting using a Large Bore gauge
Reduces inflation time 60%, deflation time 80%
1 piece stainless steel stem and collet
The core housing is held in a stainless steel extractor by a snap ring
Extractor is rugged enough so that the core housing can be loosened or tightened without being damaged. The IN-80A inflator adapter saves time by fast inflation or deflation on a tire. After removing the valve cap, the inflator is screwed onto the valve stem. The inflator stem is pushed in to engage the flats on the core housing. By rotating the stem counter clockwise, the core housing can be removed without any danger to the person removing it. The core housing is pulled up into the inflator body and held there during inflation or deflation. Can also be used for liquid-filling tires equipped with Super Large Bore valves
×
Global Message
Quick View